![running starcraft on dell xps 13 running starcraft on dell xps 13](https://www.notebookcheck.net/fileadmin/_processed_/8/e/csm_xps47_6563ffce88.jpg)
- #RUNNING STARCRAFT ON DELL XPS 13 .EXE#
- #RUNNING STARCRAFT ON DELL XPS 13 INSTALL#
- #RUNNING STARCRAFT ON DELL XPS 13 DRIVER#
- #RUNNING STARCRAFT ON DELL XPS 13 WINDOWS#
The fan will slow down as the temperature drops and it will turn off completely at 60☌. This example starts the fan at low speed when the CPU temperature reaches 65☌, and continues ramping up from there. Look for a section similar to the following in /etc/i8kutils/nf: Only three fans speeds are supported (high, low, and off). The temperature points at which the fan changes speed can be adjusted in the same configuration file. To enable its fan speed control, put the following in /etc/i8kutils/nf:
#RUNNING STARCRAFT ON DELL XPS 13 INSTALL#
In order to override this control with your own configuration, install i8kutils AUR and dell-bios-fan-control-git AUR.īy default, i8kmon only monitors the CPU temperature and fan speed passively. Despite originally conceived to resolve the same issue with Lenovo laptops, it works with Dell computers.Īs measured by some users, the BIOS throttles system performance according to battery charge level, even on AC (improvements have been made in BIOS 1.4.1).įor more information view Fan speed control#Dell laptops Installationīy default, the fan is controlled by the bios.
#RUNNING STARCRAFT ON DELL XPS 13 WINDOWS#
TLP is a userspace tool that is popular and has been reported to work well.īy default, or whatever was set on Windows by Dell Power Manager, a very conservative power profile is set somewhere in memory (seems to persist BIOS resets) and starts throttling the CPU very early (2.4GHz out of 3.9GHz max on i7-1065G7). The touchscreen has been reported to stop working after waking up from S3 deep sleep mode.įor reducing drain while running on battery power, refer to Power management. A workaround that was suggested for the Dell XPS 13 2-in-1 (7390) but seems to work for the is adding intel_iommu=off to the Kernel parameters. Kernel panics have been reported with some XPS devices when S3 deep sleep is enabled together with secure boot.
![running starcraft on dell xps 13 running starcraft on dell xps 13](https://i.dell.com/is/image/DellContent//content/dam/global-site-design/product_images/dell_client_products/notebooks/xps_notebooks/xps_13_9310/general/xps-13_black_keyboard-view.jpg)
Add mem_sleep_default=deep to the Kernel parameters and disable "Display Logo Sign of Life" under POST Behavior in BIOS setup. As a possible workaround, you can set the machine to enter S3 deep sleep mode. If the laptop seems to have an high drain when in sleep mode. Replacing xorg-xbacklight with acpilight fixes the problem. When using modesetting driver, Backlight#xbacklight may produce `No outputs have backlight property`. If you installed xf86-video-intel and experienced hanging/freezing when launching Xorg, or when launching apps with GPU Acceleration (such as kitty and alacritty), try uninstalling xf86-video-intel and let Xorg fallback to modesetting driver. Consult Intel graphics for a detailed installation and configuration guide as well as for Intel graphics#Troubleshooting.
#RUNNING STARCRAFT ON DELL XPS 13 DRIVER#
The video should work with the i915 driver of the current linux kernel. Then boot into the "BIOS Flash Update" utility by hitting F12 at boot time.
![running starcraft on dell xps 13 running starcraft on dell xps 13](https://cdn.mos.cms.futurecdn.net/oXej2YFdm2RDzhsMBpejQH-480-80.jpg)
#RUNNING STARCRAFT ON DELL XPS 13 .EXE#
exe file from the Dell Support page to any fat32 drive (even the boot partition seems to work). Current firmware version is 1.8.0.Īlternatively, for the BIOS update, you can simply copy the. Refer to Flashing BIOS from Linux#fwupd for additional information.
![running starcraft on dell xps 13 running starcraft on dell xps 13](https://images.anandtech.com/doci/15911/IMG_5539.jpg)